WARNING: Adult supervision required keeping spectators at reasonable distance.
Turn on the WARMER switch and the bottom warmer and the interior light inside the cabinet will come on.
Turn on KETTLE/MOTOR switch and wait about 4 to 6 minutes. Note: The WARMER switch must be ON for the KETTLE switch to work.
Place one quarter of oil bar in the kettle (2 ounces). Immediately add one cup (6 ounces) of raw popcorn plus 1/2 teaspoon of seasoning salt. Close the kettle top.
While the corn is popping, keep the front doors slightly open to prevent fogging. Keep the hopper door at the “out” position to aid in catching stray popped corn.
Allow the corn to pop until popping ceases; then dump remaining popped corn from kettle by rotating handle clockwise 1/3 turn and pulling downward.
Repeat steps 2-6 for additional batched of corn.
Turn the KETTLE/MOTOR switch to OFF when finished popping corn.
Wipe excess oil from the exterior of kettle as often as possible to prevent burned on oil stains.
KETTLE WILL BE HOT! Please be sure to avoid direct contact with the kettle during the popping process!
